|

Hodyon warrants all
automotive air conditioning parts to be free from defects in material and workmanship for
a period of 365 days from the date purchased. Hodyon warrants all APU
parts to be free from defect in material and workmanship for a
period of 90 days form the date purchased. This warranty does not
apply to compressors unless the installation instructions provided by
Hodyon are followed in their entirety. These instructions
follow on the next page and are always enclosed in the box with each
compressor sold. This warranty does not cover any expenses incurred in
the removal and / or reinstallation of the auto part. Specifically, this
warranty does not cover any expenses for FREON, OTHER PARTS not
purchased from Hodyon, or LABOR. This warranty is
offered only to the original purchaser of the compressor. This warranty
does not apply, and will be voided, if the auto part sold has been
damaged by abuse, misuse, accident, neglect, or alteration, or if it has
been repaired by anyone other than Hodyon. If the auto part sold
should prove defective in material or workmanship within the
warranty period, call our customer service center at 866.931.5001 to
obtain a Sales Return Authorization number, which should be included
with any and all returns. Hodyon
will, at it's option, replace or repair the compressor free of charge
and return it to you postage prepaid. Sales Return Authorization
numbers expire after 60 days.
THE EXPRESS WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTIES OR
ANY KIND, WHETHER STATUTORY, ORAL, WRITTEN, EXPRESSED OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE SHALL APPLY. THERE ARE NO WARRANTIES WHICH EXTEND
BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE CONSUMERS EXCLUSIVE
REMEDIES FOR BREACH OF WARRANTY AND Hodyon ONLY OBLIGATION
ARISING OUT OF OR IN CONNECTION WITH BREACH OF WARRANTY, SHALL BE THOSE
STATED HEREIN. Hodyon EXPRESSLY DISCLAIMS LIABILITY FOR
INCIDENTAL AND CONSEQUENTIAL DAMAGES CAUSED BY THE AUTO PART SOLD.
This warranty gives you specific rights, and you may also have other
rights which vary from state to state. In addition, some states do not
allow limitations on how long an implied warranty lasts, and some do not
allow the exclusion of limitation of incidental or consequential
damages. Accordingly, limitations as to these matters contained herein
may not apply to you.
Warranty Summary
Hodyon warranties its compressors for 365 days from the original date of purchase. For the warranty to be valid please note the following:
1) The system MUST be flushed with a no residue liquid flush or approved flushing system (e.g., live flush system), then blown out with compressed air.
2) The accumulator or filter/drier MUST be replaced.
3) If the system uses an orifice filter, the filter MUST be replaced. (If the system uses an expansion valve or block, it must be clean and in good repair or replaced with new).
4) The system MUST be vacuumed/evacuated for at least 30 minutes.
5) A licensed technician MUST install the refrigerant to properly gauged pressure levels.
6) In certain instances with vehicles using FS10/FX15 compressors that have locked down, the condenser should be replaced.
7) All related replacement parts purchased with the compressor through
Hodyon are warranted for replacement for 12 months. (Parts purchased from other suppliers are NOT covered by this replacement warranty). This EXCLUDES FREON.
8) For parts not purchased though Hodyon, proof of purchase and/or installation dated on or before the date of service is required.
9) Labor for installation or reinstallation is NOT covered under warranty.
10) It is highly recommended that licensed technicians at reputable repair shops perform all installations.
A detailed warranty is enclosed with your compressor.
Consider
A compressor is a motor, like any motor the oil reservoir must be clean and contain oil. The
system (condenser, lines, etc....) is the oil reservoir. It all must be
clean. You must flush the lines and condenser with a liquid flush. We
only recommend using a liquid flush, followed by compressed air. Use of
varsol to clean the condenser and all hoses is acceptable. It should be
followed with a "no residue" solvent such as Chlorothane or
Trichlorothane. Of course, follow this with compressed air.
Prodecure
1) Remove Freon and remove the old compressor. Disconnect the high pressure line (the small line) at the evaporator (for now leave the orifice tube / expansion valve in place).
2) IMPORTANT: The high pressure lines and condenser will most likely be
dirty. Flush the lines and the condenser with the recommended liquid
flush followed with compressed air. It's easy. Pour cleaner, about 1
quart, in the high pressure line where it attached to the compressor.
Let it flow down into the condenser and then blow it out with plenty of
air. Once fluid and trash quit coming out, repeat with more cleaner and
air. Do this until you get clean fluid to exit the lines.
3) In most cases the orifice screen or drier filter will have kept the
evaporator free from debris. If the evaporator is dirty it must be
cleaned. Use only a "no residue" solvent in the evaporator as these
solvents tend to evaporate quickly. Extra care is necessary to blow all
the solvent from the evaporator as often the tubes are not at the lowest
point of the core. If the evaporator is flushed you should allow
additional time with the vacuum pump on the system in order to "boil
out" all solvent. No solvent can be left in the system.
4) Always, WITH NO EXCEPTION, install a new accumulator or drier, and
orifice tube (certain vehicles require a new "liquid line" which
contains the orifice tube). It is acceptable to use the old expansion
valve, on vehicles so equipped, if it is clean and working. Now, with
everything clean, install the compressor.
5) Vacuum and service the system (Vacuum the system a minimum of 30
minutes).
** Our compressors are shipped with NO OIL. Add the appropriate amount
of oil to the system based on the manufacturers specifications prior to
the refrigerant charge.
Note: We make every effort to supply all compressors with the
appropriate electrical connections. However, it is possible that the
connector on our compressor could be different that your application. If
this is the case, you may cut the wire in order to use your connection
WITHOUT affecting your warranty
Note: If switches and/or a line manifold are necessary, use these from
the old unit.
Thank you for Choosing Hodyon for your Online Automotive
needs. If you have any questions about our site, this warranty or Hodyon please contact us at
info@hodyon.com
|